Billion Electric Company 7300M User Manual

Before configuring the BiPAC 7300M router, you need to know the following default settings. 

  Web Interface: 

  Username: admin 

  Password: admin 

  LAN Device IP Settings: 

  IP Address: 192.168.1.254 

   Subnet Mask: 255.255.255.0 

  PPPoE 

  DHCP server is enabled. 

  Start IP Address: 192.168.1.100 

  IP pool counts: 100 

The default username and password are “admin” and “admin” respectively. 

 

 

 

 

 

 

 

 

 

 

 

 

To reset the router or to restore it to factory default settings press the

Reset button using the end of paper clip or other small pointed object.

1. To perform Failure recovery for a dead router: 

Simply hold the Reset button when powering on the router and 
download an application if necessary. 

2. To perform recovery in case of a misplaced Password: 

Hold the Reset button until the LEDs all turn Off, turn On and then turn
Off. The router performs configuration factory reset and the router
reboots. You can then access the router from the web GUI.