Billion Electric Company 5200N User Manual

 

8

 

 

 

 

 

 

Connect the supplied power adapter to this jack. 

After the device is powered on, press it to reset the device or 
restore to factory default settings. 
0-3 seconds: reset the device 
6 seconds above: restore to factory default settings (this is used 
when you can not login to the router, e.g. forgot the password) 

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the 
four LAN ports when connecting to a PC or an office/home 
network of 10Mbps or 100Mbps. 

Connect the supplied RJ-11 (“telephone”) cable to this port when 
connecting to the ADSL/telephone network. 

Push the WPS button to trigger the Wi-Fi Protected Setup 
function. 

One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that 

all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that 

the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper 

cables.