Billion Electric Company 7404V User Manual

 

Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address which 
connecting to the router.     

You can easily by checking the box next to the IP address to be blocked or allowed. Then, Add to insert to 
the Ethernet Client Filter table.    The maximum Ethernet client is 16. 

 

WLAN Service: Default setting is set to Enable.  If you do not have any wireless, both 802.11g and 
802.11b, device in your network, select Disable.   

Mode:  The default setting is 802.11b+g (Mixed mode). If you do not know or have both 11g and 11b 
devices in your network, then keep the default in mixed mode.    From the drop-down manual, you can 
select 802.11g if you have only 11g card.    If you have only 11b card, then select 802.11b.   

ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from another.   
For security propose, change the default wlan-ap to a unique ID name to the AP which is already built-in 
to the router’s wireless interface. It is case sensitive and must not excess 32 characters. Make sure your 
wireless clients have exactly the ESSID as the device, in order to get connected to your network.     

Note: It is case sensitive and must not excess 32 characters. 

ESSID Broadcast:  It is function in which transmits its ESSID to the air so that when wireless client 
searches for a network, router can then be discovered and recognized. Default setting is Enabled.  

  Disable: If you do not want broadcast your ESSID.  Any client uses “any” wireless setting 

cannot discover the Access Point (AP) of your router. 

  Enable: Any client that using the “any” setting can discover the Access Point (AP) in   

Regulation Domain: There are seven Regulation Domains for you to choose from, including North 

33