Billion Electric Company 7404V User Manual

Chapter 4: Configuration   

63

MSN (7001)  UDP(17)  7001  7001  YES 

YES 

N/A N/A  N/A 

N/A 

MSN VEDIO 
(9000) 

TCP(6)  9000  9000  NO 

YES 

N/A N/A  N/A 

N/A 

 
Inbound: Internet to LAN ; Outbound: LAN to Internet. 
YES: Allowed ; NO: Blocked ; N/A: Not Applicable    
 

 
 

 

Rule Name: Users-define description to identify this entry or click 

  to select existing 

predefined rules. The maximum name length is 32 characters.

Time Schedule: It is self-defined time period.    You may specify a time schedule for your prioritization 
policy. For setup and detail, refer to Time Schedule section 

Source IP Address(es) / Destination IP Address(es): This is the Address-Filter used to allow or block 
traffic to/from particular IP address(es).    Selecting the Subnet Mask of the IP address range you wish to 
allow/block the traffic to or form; set IP address and Subnet Mask to 0.0.0.0 to inactive the Address-Filter 
rule.         

 To block access, to/from a single IP address, enter that IP address as the Host IP Address and use 

a Host Subnet Mask of “255.255.255.255”. 

Type: It is the packet protocol type used by the application, select TCP, UDP or both TCP/UDP.   

Source Port: This Port or Port Ranges defines the port allowed to be used by the Remote/WAN to 
connect to the application. Default is set from range 0 ~ 65535. It is recommended that this option be 
configured by an advanced user.     

Destination Port: This is the Port or Port Ranges that defines the application.     

Inbound / Outbound: Select  Allow or Block the access to the Internet (“Outbound”) or from the 
Internet (“Inbound”). 

Click Apply button to apply your changes.