Billion Electric Company 7404V User Manual

Chapter 4: Configuration   

Connection Name: User-defined name for the connection (e.g. “connection to office”). 

Local Network: Set the IP address, subnet or address range of the local network.     

  Single Address: The IP address of the local host.   

 Subnet: The subnet of the local network. For example, IP: 192.168.1.0 with netmask 

255.255.255.0 specifies one class C subnet starting from 192.168.1.1 (i.e. 192.168.1.1 through 
to 192.168.1.254). 

  IP Range:  The IP address range of the local network. For example, IP: 192.168.1.1, end IP: 

192.168.1.10.  

Remote Secure Gateway Address (or Domain Name): The IP address or hostname of the remote VPN 
device that is connected and establishes a VPN tunnel. 

Remote Network: Set the IP address, subnet or address range of the remote network.   

Proposal:  Select the IPSec security method. There are two methods of checking the authentication 
information, AH (authentication header) and ESP (Encapsulating Security Payload). Use ESP for greater 
security so that data will be encrypted and authenticated. Using AH data will be authenticated but not 
encrypted. 

Authentication: Authentication establishes the integrity of the datagram and ensures it is not tampered 
with in transmit. There are three options, Message Digest 5 (MD5), Secure Hash Algorithm (SHA1) or 
NONE. SHA1 is more resistant to brute-force attacks than MD5, however it is slower. 

 

    MD5: A one-way hashing algorithm that produces a 128−bit hash. 

 

  SHA1: A one-way hashing algorithm that produces a 160−bit hash.  

Encryption: Select the encryption method from the pull-down menu. There are several options, DES, 
3DES, AES (128, 192 and 256) and NULL. NULL means it is a tunnel only with no encryption. 3DES and 
AES are more powerful but increase latency. 

 

  DES: Stands for Data Encryption Standard, it uses 56 bits as an encryption method. 

83