Billion Electric Company 7402NX User Manual

Page of 128
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router 
 
Chapter 3: Basic Installation 
 
 
16 
Factory Default Settings 
Before configuring your, you need to know the following default settings. 
Web Interface (Username and Password) 
  Username: admin 
  Password: admin 
The default username and password are “admin” and “admin” respectively. 
 
 
 
 
 
Device LAN IP settings 
  IP Address: 192.168.1.254 
  Subnet Mask: 255.255.255.0 
ISP setting in WAN site   
  PPPoE 
DHCP server 
  DHCP server is enabled. 
  Start IP Address: 192.168.1.100 
  IP pool counts: 100 
LAN and WAN Port Addresses   
 
The parameters of LAN and WAN ports are pre-set in the factory.    The default values are shown below. 
 
LAN Port 
WAN Port 
IP address   
192.168.1.254 
Subnet Mask 
255.255.255.0 
DHCP server function   
Enabled 
IP 
addresses 
for 
distribution to PCs 
100  IP  addresses  continuing  from 
192.168.1.100 through 192.168.1.199 
The PPPoE function is enabled 
to  automatically  get  the  WAN 
port configuration from the ISP. 
 
 
 
Attention
 
If  you  ever  forget  the  username/password  to  login  to  the  router,  you  may 
press  the  RESET  button  up  to  6  seconds  to  restore  the  factory  default 
settings. 
Caution: After pressing the RESET button for more than 6 seconds, to be sure you power 
cycle the device again.
 
 
Attention