Barco 26-1302001-00 User Manual
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide
Rev. 01
13
1.4 Physical Description
The MATRIXPRO-II DVI 16 X 16 router chassis is mountable on a 19” standard rack.
Key buttons, LCD display and reset switch are on the front panel as shown below.
Key buttons, LCD display and reset switch are on the front panel as shown below.
Figure 1-1: Front panel of MATRIXPRO-II DVI 16 X 16
All Input and output cards, interface ports and power supplies are placed on the rear
panel as shown below.
panel as shown below.
▪
Input bay for 4 input cards (left side)
▪
Output bay for 4 output cards (right side)
▪
SERVICE, RJ-11 receptacle for firmware upgrades
▪
RS-232, Serial communication port
▪
LAN, RJ-45 receptacle for TCP/IP or UDP control
▪
REFERENCE OUTPUT provides an internal test pattern video source
▪
MONITORING OUTPUT provides an additional output to monitor input signals
▪
Power supplies (second power supply is optional, Barco p/n R767420K)
Figure 1-2: Rear panel of MATRIXPRO-II DVI 16 X 16