Barco 8x8 User Manual

GUI Operation

„

Use the following steps to utilize the Video Switching Tab:

1.  Click on the Video Switching Tab on the GUI page.  A sample tab is shown 

below.

Figure 4-5.  Video Switching Tab  (sample)

2.  Select input 1 by clicking once on it.  The input "key" turns yellow.  Click on the 

"key" a second time to de-select it.

3.  Select an Output channel (e.g., Output 1).  The Output "key" turns white indicating 

that a video route has been selected.  To the right of the Output "key" in the Video 
column, a red box appears in which the Input channel assignment is listed.  The 
red color indicates that a route is pending.  Please note:

On the front panel of the MatrixPRO, the Output channel will be steadily 
illuminated while the Input key will start blinking.  This also is an 
indication that a route is pending.

4.  Click the Take key on the GUI page.  The red box in the Video column turns green 

indicating a completed route.  The front panel Input key will be steadily 
illuminated.  Please note:

The Video Switching page mimics the MatrixPRO front panel — in that 
the user must click on a given input channel "key" in order to see the type