ZyXEL Communications P-660R-11V3 User Manual

Chapter 19 CWMP

P-660R-T1 v3 User’s Guide

Use this screen to configure your ZyXEL Device to be managed by a management server. 
Click Access Management > CWMP to display the following screen.

Figure 69   Access Management > CWMP

The following table describes the fields in this screen. 

Table 40   Access Management > CWMP

CWMP Setup

CWMP

Select Activated to allow the ZyXEL Device to be managed by a management server 

or select Deactivated to not allow the ZyXEL Device to be managed by a 

management server.

Login ACS

Configure this part of the screen to log into the management server.

URL

Type the IP address or domain name of the management server. If the ZyXEL Device 

is behind a NAT router that assigns it a private IP address, you will have to configure a 

NAT port forwarding rule on the NAT router.

User Name

The user name is used to authenticate the ZyXEL Device when making a connection 

to the management server. This user name on the management server and the ZyXEL 

Device must be the same. Type a user name of up to 255 printable characters found 

on an English-language keyboard. Spaces and characters such as @#$%^&*()_+ are 

allowed.

Password

The password is used to authenticate the ZyXEL Device when making a connection to 

the management server. This password on the management server and the ZyXEL 

Device must be the same. Type a password of up to 255 printable characters found on 

an English-language keyboard.

Connection 

Request

Use this part of the screen to allow the management server to connect to the ZyXEL 

Device after a successful login.

Path

Type the IP address or domain name of the ZyXEL Device. The management server 

uses this path to verify the ZyXEL Device.