ZyXEL Communications P-660R-11V3 User Manual
Chapter 11 Quality of Service (QoS)
P-660R-T1 v3 User’s Guide
95
11.2.1 The QoS Settings Summary Screen
Use this screen to display a summary of rules and actions configured for the ZyXEL Device.
In the Advanced > QoS screen, click the QoS Settings Summary button to open the
following screen.
In the Advanced > QoS screen, click the QoS Settings Summary button to open the
following screen.
Figure 42 Advanced Setup > QoS > QoS Settings Summary
The following table describes the labels in this screen.
Queue #
Specify a Low, Medium, High or Highest queue tag to matched traffic. Traffic
assigned to a higher queue gets through faster while traffic in lower queues is
dropped when there is network congestion.
ADD
Click this to add the rule.
DELETE
Click this to remove the rule.
CANCEL
Click this to restore previously saved settings.
Table 27 Advanced Setup > QoS
LABEL
DESCRIPTION
Table 28 Advanced Setup > QoS > QoS Settings Summary
LABEL
DESCRIPTION
Rules
#
This is the rule’s index number.
Active
This shows whether the rule is enabled or disabled.
Physical Ports
This is the physical port associated with the rule.
Destination MAC
and IP/Mask Port
Ranges
This is the port range for destination MAC address and IP address.
Source MAC and
IP/Mask Port
Ranges
This is the port range for source MAC address and IP address.
Protocol ID
This is the protocol ID associated with the rule.
VLAN ID
This is the VLAN ID associated with the rule.
IPP/TOS (DSCP)
This shows the IPP/TOS or DSCP settings.
802.1p
This is the 802.1p priority level.
Actions