ZyXEL Communications P-660RU-Tx User Manual
Chapter 15 Filters
P-660RU-Tx User’s Guide
121
Direction
Apply the filter to Both, Incoming or Outgoing traffic
direction.
direction.
IP/MAC Filter Rule Editing
IP/MAC Filter Rule
Index
IP/MAC Filter Rule
Index
Select the index number of the filter rule.
Rule Type
Select IP or MAC type to configure the rule.
Use the IP Filter to block traffic by IP addresses.
Use the MAC Filter to block traffic by MAC address.
Active
Use this field to enable or disable the rule.
Source IP Address
Enter the source IP address of the packets you wish to filter.
This field is ignored if it is 0.0.0.0.
This field is ignored if it is 0.0.0.0.
Subnet Mask
Enter the IP subnet mask for the source IP address
Port Number
Enter the source port of the packets that you wish to filter. The
range of this field is 0 to 65535. This field is ignored if it is 0.
range of this field is 0 to 65535. This field is ignored if it is 0.
Destination IP Address
Enter the destination IP address of the packets you wish to
filter. This field is ignored if it is 0.0.0.0.
filter. This field is ignored if it is 0.0.0.0.
Subnet Mask
Enter the IP subnet mask for the destination IP address.
Port Number
Enter the destination port of the packets that you wish to filter.
The range of this field is 0 to 65535. This field is ignored if it is
0.
The range of this field is 0 to 65535. This field is ignored if it is
0.
Protocol
Select ICMP, TCP or UDP for the upper layer protocol.
MAC Address
This field is only available when you select MAC in the Rule
Type field.
Type field.
Enter the MAC address of the packets you wish to filter.
Rule Unmatched
Select the action for a packet not matching the rule.
Select Forward to forward traffic immediately and skip
checking the remaining rules. Select Next to check the next
rule.
checking the remaining rules. Select Next to check the next
rule.
IP Filter Listing
IP Filter Set Index
IP Filter Set Index
Select the index number of the filter set from the drop-down list
box.
box.
Interface
This is the interface that the filter set applies to.
Direction
The filter set applies to this traffic direction.
#
This is the index number of the rule in a filter set.
Active
This field shows whether the rule is activated.
Src Address/Mask
This is the source IP address and subnet mask when you select
IP as the rule type.
IP as the rule type.
This is the MAC address when you select MAC as the rule type.
Dest IP/Mask
This is the destination IP address and subnet mask.
Src Port
This is the source port number.
Dest Port
This is the destination port number.
Table 34 Access Management > Filter (IP/MAC) (continued)
LABEL
DESCRIPTION