ZyXEL Communications P-660RU-Tx User Manual
Chapter 3 Device Information
P-660RU-Tx User’s Guide
44
The following table describes the fields in this screen.
Table 3 Status > Device Information
LABEL
DESCRIPTION
Device Information
Firmware
Version
This is the current version of the firmware inside the device. It also
shows the date the firmware version was created.
shows the date the firmware version was created.
MAC
Address
This is the MAC (Media Access Control) or Ethernet address unique to
your P-660RU-Tx.
your P-660RU-Tx.
LAN
IP Address
This is the current IP address of the P-660RU-Tx in the LAN.
Subnet Mask This is the current subnet mask in the LAN.
DHCP Server This field displays what DHCP services the P-660RU-Tx is providing to
DHCP Server This field displays what DHCP services the P-660RU-Tx is providing to
the LAN. Choices are:
Enabled - The P-660RU-Tx is a DHCP server in the LAN. It can assign
IP addresses to other computers in the LAN.
IP addresses to other computers in the LAN.
Relay - The P-660RU-Tx acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the
clients.
DHCP requests and responses between the remote server and the
clients.
Disabled - The P-660RU-Tx is not providing any DHCP services to the
LAN.
LAN.
WAN
Virtual
Circuit
Use the drop-down list box to select a virtual circuit. The fields below
display information about the virtual circuit you choose.
display information about the virtual circuit you choose.
Status
This is the status of the WAN connection.
Connection
Type
This is the connection type supported by your ISP.
IP Address
This is the current IP address of the P-660RU-Tx in the WAN, if
applicable.
applicable.
Subnet Mask This is the current subnet mask in the WAN, if applicable.
Default
Default
Gateway
This is the IP address of the default gateway, if applicable.
DNS Server
This is the current DNS server in the WAN, if applicable.
NAT
This field displays whether NAT is activated.
ADSL
ADSL
Firmware
Version
This is the current version of the device’s DSL modem code.
Line State
This is the status of your ADSL connection.
Modulation
This is the ADSL modulation of your P-660RU-Tx.
Annex Mode
This is the annex mode of your P-660RU-Tx.
Downstream This is the downstream speed of your ZyXEL Device.
Upstream
Upstream
This is the upstream speed of your ZyXEL Device.