ZyXEL Communications P-660RU-Tx User Manual
Chapter 8 LAN Setup
P-660RU-Tx User’s Guide
77
8.2 The LAN Screen
Use this screen to configure your LAN settings. Click Interface Setup > LAN to
display the following screen.
display the following screen.
Follow these steps to configure your LAN settings.
1
Enter an IP address into the IP Address field. The IP address must be in dotted
decimal notation. This will become the IP address of your P-660RU-Tx.
decimal notation. This will become the IP address of your P-660RU-Tx.
2
Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed
otherwise it is best to leave this alone, the configurator will automatically compute
a subnet mask based upon the IP address you entered.
otherwise it is best to leave this alone, the configurator will automatically compute
a subnet mask based upon the IP address you entered.
3
Click SAVE to save your settings.
Figure 28 Interface Setup > LAN
The following table describes the fields in this screen.
Table 17 Interface Setup > LAN
LABEL
DESCRIPTION
Router Local IP
IP Address
IP Address
Enter the LAN IP address you want to assign to your P-660RU-Tx in
dotted decimal notation, for example, 192.168.1.1 (factory default).
dotted decimal notation, for example, 192.168.1.1 (factory default).
IP Subnet Mask
Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default). Your P-660RU-Tx
automatically computes the subnet mask based on the IP Address you
enter, so do not change this field unless you are instructed to do so.
example 255.255.255.0 (factory default). Your P-660RU-Tx
automatically computes the subnet mask based on the IP Address you
enter, so do not change this field unless you are instructed to do so.