ZyXEL Communications P-660RU-Tx User Manual
Chapter 10 Network Address Translation (NAT)
P-660RU-Tx User’s Guide
96
Use this screen to change your P-660RU-Tx’s address mapping settings. Click
Advanced Setup > NAT > IP Address Mapping to open the following screen.
Advanced Setup > NAT > IP Address Mapping to open the following screen.
Figure 38 Advanced Setup > NAT > IP Address Mapping
The following table describes the fields in this screen.
Table 25 Network > NAT > Address Mapping
LABEL
DESCRIPTION
IP Address Mapping
Address
Mapping Rule
Address
Mapping Rule
The rules configured in this screen apply to this PVC.
Rule Index
Select the rule’s index number from the drop-down list box.
Rule Type
Choose the port mapping type from one of the following.
One-to-One: This mode maps one local IP address to one public IP
address. Note that port numbers do not change for one-to-one NAT
mapping type.
address. Note that port numbers do not change for one-to-one NAT
mapping type.
Many-to-One: This mode maps multiple local IP addresses to one public
IP address. This is equivalent to the Single IP feature that previous
ZyXEL routers supported only.
IP address. This is equivalent to the Single IP feature that previous
ZyXEL routers supported only.
Many-to-Many Overload: This mode maps multiple local IP addresses
to shared public IP addresses.
to shared public IP addresses.
Many-to-Many No Overload: This mode maps each local IP address to
unique public IP addresses.
unique public IP addresses.
Server: This type allows you to specify inside servers of different
services behind the NAT to be accessible to the outside world.
services behind the NAT to be accessible to the outside world.
Local Start IP
This is the starting local IP address. Local IP addresses are N/A for
Server port mapping.
Server port mapping.