ZyXEL Communications P-660R-Tx v2 Series User Manual

P-660R-Tx v2 Series User’s Guide

164

 

 

Successful HTTPS login

Someone has logged on to the router's web configurator 

interface using HTTPS protocol.

HTTPS login failed

Someone has failed to log on to the router's web configurator 

interface using HTTPS protocol.

Table 60   System Error Logs

%s exceeds the max. 
number of session per 
host!

This attempt to create a NAT session exceeds the maximum 

number of NAT session table entries allowed to be created per 

host.

setNetBIOSFilter: calloc 
error

The router failed to allocate memory for the NetBIOS filter settings.

readNetBIOSFilter: calloc 
error

The router failed to allocate memory for the NetBIOS filter settings.

WAN connection is down.

A WAN connection is down. You cannot access the network 

through this interface.

Table 61   Packet Filter Logs

[TCP | UDP | ICMP | IGMP | 
Generic] packet filter 
matched (set:%d, rule:%d)

Attempted access matched a configured filter rule (denoted by 

its set and rule number) and was blocked or forwarded 

according to the rule.

Table 62   CDR Logs

board%d line%d channel%d, 
call%d,%s C01 Outgoing Call 
dev=%x ch=%x%s

The router received the setup requirements for a call. “call” is 

the reference (count) number of the call. “dev” is the device 

type (3 is for dial-up, 6 is for PPPoE, 10 is for PPTP). 

"channel" or “ch” is the call channel ID.For example,"board 0 

line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 

"Means the router has dialed to the PPPoE server 3 times.

board%d line%d channel%d, 
call%d,%s C02 OutCall 
Connected%d%s

The PPPoE, PPTP or dial-up call is connected.

board%d line%d channel%d, 
call%d,%s C02 Call Terminated

The PPPoE, PPTP or dial-up call was disconnected.

Table 59   System Maintenance Logs (continued)