ZyXEL Communications NBG-416N User Manual
Chapter 10 Network Address Translation
NBG-416N User’s Guide
114
so incoming reply packets can have their original values restored. The following
figure illustrates this.
figure illustrates this.
Figure 73 How NAT Works
10.3 General NAT Screen
Use this screen to enable NAT and set a default server. Click Network > NAT to
open the General screen.
open the General screen.
Figure 74 Network > NAT > General
The following table describes the labels in this screen.
Table 47 Network > NAT > General
LABEL
DESCRIPTION
NAT Setup
Enable Network
Address
Translation
Enable Network
Address
Translation
Network Address Translation (NAT) allows the translation of an Internet
protocol address used within one network (for example a private IP
address used in a local network) to a different IP address known within
another network (for example a public IP address used on the Internet).
protocol address used within one network (for example a private IP
address used in a local network) to a different IP address known within
another network (for example a public IP address used on the Internet).
Select the check box to enable NAT.
Default Server Setup