ZyXEL Communications NBG-416N User Manual

 Chapter 4 Modes

NBG-416N User’s Guide

Connect your computer to the LAN port of the NBG-416N. 

The default LAN IP address of the NBG-416N is 192.168.1.1 in router mode 
(192.168.1.2 by default in non-router mode). In router mode, the NBG-416N can 
assign your computer an IP address, so you must set your computer to get an IP 
address automatically (computer factory default) or give it a fixed IP address in 
the range between 192.168.1.3 and 192.168.1.254.

After you’ve set your computer’s IP address, open a web browser such as Internet 
Explorer and type the IP address of the NBG-416N as the web address in your web 
browser.

Log into the Web Configurator. See the 

 for instructions on 

how to do this.

System

General

Use this screen to view and change administrative settings 
such as system and domain names, password and 
inactivity timer.

Time Setting

Use this screen to change your NBG-416N’s time and date.

Logs

View Log

Use this screen to view the logs for the categories that you 
selected.

Tools

Firmware

Use this screen to upload firmware to your NBG-416N.

Configuration Use this screen to backup and restore the configuration or 

reset the factory defaults to your NBG-416N. 

Restart

This screen allows you to reboot the NBG-416N without 
turning the power off.

Sys OP 

Mode

General

This screen allows you to select the device operation 
mode.

Language

Language

This screen allows you to select the language you prefer.

Table 19   Menus: Router Mode (continued)