ZyXEL Communications P-661HNU-Fx User Manual
Chapter 10 Quality of Service (QoS)
ADSL Series User’s Guide
168
The following table describes the labels in this screen.
10.3.1 Add/Edit a QoS Queue
Use this screen to configure a queue. Click Add new queue in the Queue Setup screen or the
Edit icon next to an existing queue.
Edit icon next to an existing queue.
Figure 80
Queue Setup: Add/Edit
The following table describes the labels in this screen.
Table 42
Network Setting > QoS > Queue Setup
LABEL
DESCRIPTION
Add new Queue
Click this to create a new entry.
#
This is the index number of this entry.
Status
Select the check box to enable the queue.
Name
This shows the descriptive name of this queue.
Interface
This shows the name of the ZyXEL Device’s interface through which traffic in this queue
passes.
passes.
Priority
This shows the priority of this queue.
Weight
This shows the weight of this queue.
Buffer
Management
Management
This shows the queue management algorithm used by the ZyXEL Device.
Rate Limit
(kbps)
(kbps)
This shows the maximum transmission rate allowed for traffic on this queue.
Modify
Click the Edit icon to edit the queue.
Click the Delete icon to delete an existing queue. Note that subsequent rules move up by
one when you take this action.
one when you take this action.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to restore your previously saved settings.
Table 43
Queue Setup: Add/Edit
LABEL
DESCRIPTION
Active
Select to enable or disable this queue.
Name
Enter the descriptive name of this queue.
Interface
This shows the name of the ZyXEL Device’s interface through which traffic in this queue
passes.
passes.