ZyXEL Communications P-661HNU-Fx User Manual
Chapter 16 VPN
ADSL Series User’s Guide
207
Figure 107
Security > VPN > Setup > Edit
The following table describes the fields in this screen.
Table 63
Security > VPN > Setup > Edit
LABEL
DESCRIPTION
IPSec Setup
Active
Select this check box to activate this VPN policy. This option determines whether a VPN
rule is applied before a packet leaves the firewall.
rule is applied before a packet leaves the firewall.
NAT Traversal
Select this check box if you want to set up a VPN tunnel when there are NAT routers
between the ZyXEL Device and remote IPSec router. The remote IPSec router must
also enable NAT traversal, and the NAT routers have to forward UDP port 4500 packets
to the remote IPSec router behind the NAT router.
between the ZyXEL Device and remote IPSec router. The remote IPSec router must
also enable NAT traversal, and the NAT routers have to forward UDP port 4500 packets
to the remote IPSec router behind the NAT router.
Tunnel Name
Type up to 32 characters to identify this VPN policy. You may use any character,
including spaces, but the ZyXEL Device drops trailing spaces.
including spaces, but the ZyXEL Device drops trailing spaces.
Mode
Select net-net or Roadwarrior from the drop-down list box. Multiple SAs connecting
through a secure gateway must have the same negotiation mode.
through a secure gateway must have the same negotiation mode.