ZyXEL Communications P-870HN-51b User Manual
ENGLISH
11
WLAN Setup with WPS
You can use Wi-Fi Protected Setup (WPS) to set up a secure wireless
network and add wireless devices to your wireless network at the touch
of a button. The other wireless devices must also support WPS. Look for
the WPS/WLAN button on the rear panel of your device.
network and add wireless devices to your wireless network at the touch
of a button. The other wireless devices must also support WPS. Look for
the WPS/WLAN button on the rear panel of your device.
1. Place a WPS-enabled device within range of the P-870HN-51b.
2. Press the WPS/WLAN button on the P-870HN-51b for five seconds.
Press the WPS button on another WPS-enabled device. It doesn’t
matter which button is pressed first. You must press the second
button within two minutes of pressing the first one.
matter which button is pressed first. You must press the second
button within two minutes of pressing the first one.
Your P-870HN-51b allows the PBC (Push Button Configuration) method,
as well as the PIN (Personal Identification Number) configuration via the
web configurator. See your User’s Guide for more information. Other
WPS-enabled devices should provide at least one similar method.
as well as the PIN (Personal Identification Number) configuration via the
web configurator. See your User’s Guide for more information. Other
WPS-enabled devices should provide at least one similar method.
3. The WLAN/WPS LED on the P-870HN-51b blinks for a few seconds,
then shines steadily, indicating your devices are connected.
4. To add another WPS-enabled device to your wireless network, press
the WPS buttons on your P-870HN-51b and your next WPS-enabled
device.
device.
Congratulations! You are now ready to connect to the Internet wirelessly
through your P-870HN-51b.
through your P-870HN-51b.