ZyXEL Communications NBG410W3G Series User Manual

 Chapter 10 Authentication Server

NBG410W3G Series User’s Guide

The following table describes the labels in this screen.   

Click SECURITY > AUTH SERVER > RADIUS to open the RADIUS screen. Configure 
this screen to use an external RADIUS server to authenticate users. 

Figure 117   SECURITY > AUTH SERVER > RADIUS

The following table describes the labels in this screen.  

Table 49   SECURITY > AUTH SERVER > Local User Database

Active 

Select this check box to enable the user profile.

User Name

Enter the user name of the user profile.

Password

Enter a password up to 31 characters long for this user profile. 

Apply

Click Apply to save your changes.

Reset

Click Reset to begin configuring this screen afresh.

Table 50   SECURITY > AUTH SERVER > RADIUS

Authentication Server

Active

Select the check box to enable user authentication through an external 

authentication server.
Clear the check box to enable user authentication using the local user profile 

on the ZyXEL Device. 

Server IP Address

Enter the IP address of the external authentication server in dotted decimal 

notation. 

Port Number

The default port of the RADIUS server for authentication is 1812. 
You need not change this value unless your network administrator instructs 

you to do so with additional information.