ZyXEL Communications NBG410W3G Series User Manual

Page of 430
Chapter 12 Network Address Translation (NAT)
NBG410W3G Series User’s Guide
236
"
If you do not assign a Default Server IP address, the ZyXEL Device discards 
all packets received for ports that are not specified here or in the remote 
management setup.
12.5.2  Port Forwarding: Services and Port Numbers
The ZyXEL Device provides the additional safety of the DMZ ports for connecting your 
publicly accessible servers. This makes the LAN more secure by physically separating it from 
your public servers. 
Use the Port Forwarding screen to forward incoming service requests to the server(s) on your 
local network. 
The most often used port numbers are shown in the following table. Please refer to RFC 1700 
for further information about port numbers. 
12.5.3  Configuring Servers Behind Port Forwarding (Example)
Let's say you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the 
example), port 80 to another (B in the example) and assign a default server IP address of 
192.168.1.35 to a third (C in the example). You assign the LAN IP addresses and the ISP 
assigns the WAN IP address. The NAT network appears as a single host on the Internet.
Table 70   Services and Port Numbers
SERVICES
PORT NUMBER
ECHO
7
FTP (File Transfer Protocol)
21
SMTP (Simple Mail Transfer Protocol)
25
DNS (Domain Name System)
53
Finger
79
HTTP (Hyper Text Transfer protocol or WWW, Web)
80
POP3 (Post Office Protocol)
110
NNTP (Network News Transport Protocol)
119
SNMP (Simple Network Management Protocol)
161
SNMP trap
162
PPTP (Point-to-Point Tunneling Protocol)
1723