ZyXEL Communications NBG410W3G Series User Manual

 Chapter 15 Remote Management

NBG410W3G Series User’s Guide

Click ADVANCED > REMOTE MGMT > SSH to change your ZyXEL Device’s Secure 
Shell settings. 

"

It is recommended that you disable Telnet and FTP when you configure SSH 
for secure connections.

Figure 168   ADVANCED > REMOTE MGMT > SSH

The following table describes the labels in this screen. 

Table 77   ADVANCED > REMOTE MGMT > SSH

Server Host Key

Select the certificate whose corresponding private key is to be used to identify the 

ZyXEL Device for SSH connections. You must have certificates already configured 

in the My Certificates screen (Click My Certificates and see 

 

for details).

Server Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secure Client IP 

Address

A secure client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.