ZyXEL Communications NBG410W3G Series User Manual

 Chapter 15 Remote Management

NBG410W3G Series User’s Guide

The following table describes the labels in this screen. 

You can use FTP (File Transfer Protocol) to upload and download the ZyXEL Device’s 
firmware and configuration files, please see the User’s Guide chapter on firmware and 
configuration file maintenance for details. To use this feature, your computer must have an 
FTP client.
To change your ZyXEL Device’s FTP settings, click ADVANCED > REMOTE MGMT > 
FTP. The screen appears as shown. Use this screen to specify which interfaces allow FTP 
access and from which IP address the access can come. 

"

It is recommended that you disable Telnet and FTP when you configure SSH 
for secure connections.

Figure 174   ADVANCED > REMOTE MGMT > FTP

Table 78   ADVANCED > REMOTE MGMT > Telnet

Server Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secure Client IP 

Address

A secure client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.