ZyXEL Communications NBG410W3G Series User Manual

Chapter 19 Logs Screens

NBG410W3G Series User’s Guide

"

Computers take turns using dynamically assigned LAN or DMZ IP addresses. 
The ZyXEL Device continues recording the bytes sent to or from a LAN or 
DMZ IP address when it is assigned to a different computer. 

Figure 192   LOGS > Reports: Host IP Address Example

The following table describes the labels in this screen.  

In the Reports screen, select Protocol/Port from the Report Type drop-down list box to have 
the ZyXEL Device record and display which protocols or service ports have been used the 
most and the amount of traffic for the most used protocols or service ports.

Table 93   LOGS > Reports: Host IP Address

IP Address

This column lists the LAN or DMZ IP addresses to and/or from which the most traffic 

has been sent. The LAN or DMZ IP addresses are listed in descending order with 

the LAN or DMZ IP address to and/or from which the most traffic was sent listed first.

Direction

This field displays Incoming to denote traffic that is coming in from the WAN to the 

LAN or DMZ. This field displays Outgoing to denote traffic that is going out from the 

LAN or DMZ to the WAN.

Amount

This column displays how much traffic has gone to and from the listed LAN or DMZ 

IP addresses. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) 

varies with the amount of traffic sent to and from the LAN or DMZ IP address. The 

count starts over at 0 if the total traffic sent to and from a LAN or DMZ IP passes the 

bytes count limit (see