ZyXEL Communications NBG410W3G Series User Manual

 Chapter 19 Logs Screens

NBG410W3G Series User’s Guide

Connect to Daytime server 
fail

The router was not able to connect to the Daytime server.

Connect to Time server fail

The router was not able to connect to the Time server.

Connect to NTP server fail

The router was not able to connect to the NTP server.

Too large ICMP packet has 
been dropped

The router dropped an ICMP packet that was too large.

Configuration Change: PC = 
0x%x, Task ID = 0x%x

The router is saving configuration changes.

Successful SSH login

Someone has logged on to the router’s SSH server.

SSH login failed

Someone has failed to log on to the router’s SSH server.

Successful HTTPS login

Someone has logged on to the router's web configurator 

interface using HTTPS protocol.

HTTPS login failed

Someone has failed to log on to the router's web configurator 

interface using HTTPS protocol.

DNS server %s was not 
responding to last 32 
consecutive queries…

The specified DNS server did not respond to the last 32 

consecutive queries.

DDNS update IP:%s (host %d) 
successfully

The device updated the IP address of the specified DDNS 

host name.

SMTP successfully

The device sent an e-mail.

Table 97   System Error Logs

%s exceeds the max. 
number of session per 
host!

This attempt to create a NAT session exceeds the maximum 

number of NAT session table entries allowed to be created per 

host.

setNetBIOSFilter: calloc 
error

The router failed to allocate memory for the NetBIOS filter 

settings.

readNetBIOSFilter: calloc 
error

The router failed to allocate memory for the NetBIOS filter 

settings.

WAN connection is down.

A WAN connection is down. You cannot access the network 

through this interface.

DHCP Server cannot assign 
the static IP %S (out of 
range).

The LAN subnet, LAN alias 1, or LAN alias 2 was changed and 

the specified static DHCP IP addresses are no longer valid.

The DHCP static IP %s is 
conflict.

The static DHCP IP address conflicts with another host.

SMTP fail (%s)

The device failed to send an e-mail (error message included).

SMTP authentication fail 
(%s)

The device failed to authenticate with the SMTP server (error 

message included).

Table 96   System Maintenance Logs (continued)