ZyXEL Communications NBG410W3G Series User Manual

 Chapter 2 Introducing the Web Configurator

NBG410W3G Series User’s Guide

Figure 10   HOME > Show Statistics

The following table describes the labels in this screen.

Click the icon in the Show Statistics screen. This screen shows you a line chart of each port’s 
throughput statistics.

Table 6   HOME > Show Statistics

Click the icon to display the chart of throughput statistics. 

Port

These are the ZyXEL Device’s interfaces.  

Status

For the WAN interface(s), this displays the port speed and duplex setting if you’re 

using Ethernet encapsulation or the remote node name for a PPP connection and 

Down (line is down or not connected), Idle (line (ppp) idle), Dial (starting to trigger a 

call) or Drop (dropping a call) if you’re using PPPoE encapsulation. 
For the LAN or DMZ ports, this displays the port speed and duplex setting. 
For the Wi-Fi card, this displays the transmission rate when Wi-Fi is enabled or 

Down when Wi-Fi is disabled.

TxPkts

This is the number of transmitted packets on this port.

RxPkts

This is the number of received packets on this port.

Tx B/s

This displays the transmission speed in bytes per second on this port.

Rx B/s

This displays the reception speed in bytes per second on this port.

Up Time

This is the total amount of time the line has been up.

System Up Time This is the total time the ZyXEL Device has been on.

Automatic 

Refresh Interval 

Select a number of seconds or None from the drop-down list box to update all 

screen statistics automatically at the end of every time interval or to not update the 

screen statistics.

Refresh

Click this button to update the screen’s statistics immediately.