ZyXEL Communications NSA-2401 User Manual
Chapter 11 Maintenance Screens
NSA-2401 User’s Guide
242
1
The SYS LED blinks orange when firmware is being uploaded to the NSA. Do
not turn off or reset the NSA while the firmware update is in progress!
not turn off or reset the NSA while the firmware update is in progress!
Figure 204 Maintenance > FW Upgrade
The following table describes the labels in this screen.
11.6 Power Management
Click Maintenance > Power Management to open this screen, where you can set the NSA’s
power management settings.
power management settings.
Table 105 Maintenance > FW Upgrade
LABEL
DESCRIPTION
Firmware File
Enter the location of the firmware file you want to upload.
Browse
Click this open a Browse dialog box to find the file on your computer if
you don’t want to manually enter the location.
you don’t want to manually enter the location.
Upload
Click this to upload the new firmware.
The NSA automatically restarts after you upgrade. Wait until the restart
completes before accessing the NSA again. If you interrupt the upgrade,
then the NSA may become unusable.
The NSA automatically restarts after you upgrade. Wait until the restart
completes before accessing the NSA again. If you interrupt the upgrade,
then the NSA may become unusable.
Reset
Click this to begin configuring this screen afresh.