ZyXEL Communications nbg-418n User Manual
Chapter 17 Tools
NBG-418N User’s Guide
132
The following table describes the labels in this screen.
Note: Do not turn off the NBG-418N while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait for several minutes before logging
into the NBG-418N again.
into the NBG-418N again.
Figure 95
Upload Warning
The NBG-418N automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
operating systems, you may see the following icon on your desktop.
Figure 96
Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to the
Firmware screen.
Firmware screen.
Figure 97
Upload Error Message
Table 56
Maintenance > Tools > Firmware
LABEL
DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click Browse... to find it.
Browse...
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
decompress compressed (.zip) files before you can upload them.
Upload
Click Upload to begin the upload process. This process may take up to two minutes.