ZyXEL Communications nbg-418n User Manual

Chapter 6 Wireless LAN

NBG-418N User’s Guide

Network > Wireless LAN > MAC Filter

The following table describes the labels in this menu.

Use this screen to allow intra-BSS networking and set the RTS/CTS Threshold.

Click Network > Wireless LAN > Advanced. The screen appears as shown.

Network > Wireless LAN > MAC Filter

Active

Select Yes from the drop down list box to enable MAC address filtering.

Filter Action 

Define the filter action for the list of MAC addresses in the MAC Address table. 

Select Deny to block access to the NBG-418N, MAC addresses not listed will be allowed to 
access the NBG-418N. 

Select Allow to permit access to the NBG-418N, MAC addresses not listed will be denied 
access to the NBG-418N. 

Set

This is the index number of the MAC address.

MAC Address

Enter the MAC addresses of the wireless station that are allowed or denied access to the 
NBG-418N in these address fields. Enter the MAC addresses in a valid MAC address format, 
that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.

Apply

Click Apply to save your changes back to the NBG-418N.

Reset

Click Reset to reload the previous configuration for this screen.