ZyXEL Communications NBG-417N User Manual

Chapter 15 Static Route

NBG-417N User’s Guide

Use this screen to view existing static route rules. Click Management > Static Route to open the 
IP Static Route screen. The following screen displays.

Management > Static Route > IP Static Route

The following table describes the labels in this screen.

Management > Static Route > IP Static Route

#

This is the index number of an individual static route. The first entry is for the 
default route and not editable.

Name

This is the name that describes or identifies this route. 

Active

This icon is turned on when this static route is active.

Click the Edit icon under Modify and select the Active checkbox in the Static 
Route Setup screen to enable the static route. Clear the checkbox to disable 
this static route without having to delete the entry.

Destination

This parameter specifies the IP network address of the final destination. Routing 
is always based on network number. 

Gateway

This is the IP address of the gateway. The gateway is an immediate neighbor of 
your NBG-417N that will forward the packet to the destination. On the LAN, the 
gateway must be a router on the same segment as your NBG-417N; over the 
WAN, the gateway must be the IP address of one of the remote nodes.

Modify

Click the Edit icon to open the static route setup screen. Modify a static route or 
create a new static route in the Static Route Setup screen.

Click the Remove icon to delete a static route.