ZyXEL Communications NBG-417N User Manual
Chapter 22 Sys OP Mode
NBG-417N User’s Guide
165
AP
An AP extends one network and so has just one IP address. All Ethernet ports on the AP have the
same IP address. To connect to the Internet, another device, such as a router, is required.
same IP address. To connect to the Internet, another device, such as a router, is required.
Figure 110
IP Address in AP Mode
22.4 General Screen
Use this screen to select how you connect to the Internet.
Figure 111
Maintenance > Sys OP Mode > General
If you select Router Mode, the following pop-up message window appears.
Figure 112
Maintenance > Sys Op Mode > General: Router
• In this mode there are both LAN and WAN ports. The LAN Ethernet and WAN Ethernet ports have
different IP addresses.
• The DHCP server on your device is enabled and allocates IP addresses to other devices on your
local network.
• The LAN IP address of the device on the local network is set to 192.168.1.1.
• You can configure the IP address settings on your WAN port. Contact your ISP or system
• You can configure the IP address settings on your WAN port. Contact your ISP or system
administrator for more information on appropriate settings.