ZyXEL Communications NBG-417N User Manual
Chapter 3 Introducing the Web Configurator
NBG-417N User’s Guide
27
3.3 Resetting the NBG-417N
If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the RESET button at the back of the NBG-417N to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the password
will be reset to “1234” and the IP address will be reset to “192.168.1.1”.
to use the RESET button at the back of the NBG-417N to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the password
will be reset to “1234” and the IP address will be reset to “192.168.1.1”.
3.3.1 Procedure to Use the Reset Button
1
Make sure the power LED is on.
2
Press the RESET button for longer than 1 second to restart/reboot the NBG-417N.
3
Press the RESET button for longer than five seconds to set the NBG-417N back to its factory-
default configurations.
default configurations.
3.4 Navigating the Web Configurator
The following summarizes how to navigate the Web Configurator from the Status screen in Router
Mode and AP Mode.
Mode and AP Mode.
3.5 Status Screen (Router Mode)
Click on Status. The screen below shows the status screen in Router Mode.