ZyXEL Communications NBG-417N User Manual
Chapter 3 Introducing the Web Configurator
NBG-417N User’s Guide
31
3.5.2 Summary: DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the NBG-417N’s LAN as a
DHCP server or disable it. When configured as a server, the NBG-417N provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
that network, or else the computer must be manually configured.
obtain TCP/IP configuration at start-up from a server. You can configure the NBG-417N’s LAN as a
DHCP server or disable it. When configured as a server, the NBG-417N provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
that network, or else the computer must be manually configured.
DHCP Server
General
Use this screen to enable the NBG-417N’s DHCP server.
Advanced
Use this screen to assign IP addresses to specific individual
computers based on their MAC addresses and to have DNS
servers assigned by the DHCP server.
computers based on their MAC addresses and to have DNS
servers assigned by the DHCP server.
Client List
Use this screen to view current DHCP client information and to
always assign an IP address to a MAC address (and host name).
always assign an IP address to a MAC address (and host name).
NAT
General
Use this screen to enable NAT.
Application
Use this screen to configure
servers behind the NBG-417N.
Advanced
Use this screen to change your NBG-417N’s port triggering
settings.
settings.
DDNS
General
Use this screen to set up dynamic DNS.
Security
Firewall
General
Use this screen to activate/deactivate the firewall.
Services
This screen shows a summary of the firewall rules, and allows you
to edit/add a firewall rule.
to edit/add a firewall rule.
Content
Filter
Filter
Use this screen to block certain web features and sites containing
certain keywords in the URL.
certain keywords in the URL.
Management
Static Route
IP Static
Route
Route
Use this screen to configure IP static routes.
Remote
MGMT
WWW
Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTP to manage the NBG-
417N.
which IP address(es) users can use HTTP to manage the NBG-
417N.
UPnP
General
Use this screen to enable UPnP on the NBG-417N.
Maintenance
System
General
Use this screen to view and change administrative settings such
as system and domain names, password and inactivity timer.
as system and domain names, password and inactivity timer.
Time Setting
Use this screen to change your NBG-417N’s time and date.
Logs
View Log
Use this screen to view the logs for the categories that you
selected.
selected.
Tools
Firmware
Use this screen to upload firmware to your NBG-417N.
Configuration Use this screen to backup and restore the configuration or reset
the factory defaults to your NBG-417N.
Restart
This screen allows you to reboot the NBG-417N without turning
the power off.
the power off.
Sys OP Mode
General
This screen allows you to select whether your device acts as a
Router or a Access Point.
Router or a Access Point.
Language
This screen allows you to select the language you prefer.
Table 4
Screens Summary
LINK
TAB
FUNCTION