ZyXEL Communications NBG-417N User Manual
Chapter 7 Wireless LAN
NBG-417N User’s Guide
84
Note: Note: After you click Push Button on this screen, you have to press a similar
button in the wireless station utility within 2 minutes. To add the second wireless
station, you have to press these buttons on both device and the wireless station
again after the first 2 minutes.
Figure 51
Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
Table 33
Network > Wireless LAN > WPS Station
LABEL
DESCRIPTION
Push Button
Use this button when you use the PBC (Push Button Configuration) method to
configure wireless stations’s wireless settings. See
configure wireless stations’s wireless settings. See
Click this to start WPS-aware wireless station scanning and the wireless security
information synchronization.
information synchronization.
Or input station’s
PIN number
PIN number
Use this button when you use the PIN Configuration method to configure
wireless station’s wireless settings. See
wireless station’s wireless settings. See
.
Type the same PIN number generated in the wireless station’s utility. Then click
Start to associate to each other and perform the wireless security information
synchronization.
Start to associate to each other and perform the wireless security information
synchronization.