ZyXEL Communications P-660R-T1 v2 User Manual

P-660R-TxC Series Quick Start Guide

3

Note: Configuration genie and Zero configuration are only able to configure the device automatically for 

Internet access if you are using PPPoE, PPPoA or ENET ENCAP encapsulation with a 
dynamically-assigned IP address from your ISP. 

If you’re not using these Internet access settings, then use the Web Configurator Internet 
Access Wizard to manually configure the device. 

You will need your Internet access information such as user name and password if given by your ISP.

From the included CD, click “Multimedia Auto Provisioner” (the installation and configuration assistant) and 
then click “Installation Tutorial”. After you’ve viewed the tutorial, click “Configuration Genie” at the end of the 
installation tutorial or from “Multimedia Auto Provisioner” in the CD.

Launch your web browser and navigate to any web site (for 
example, www.zyxel.com). The P-660R-TxC automatically 
detects and configures your Internet connection. This may 
take about two minutes.

If you have a PPPoE or PPPoA connection, a screen displays 
prompting you to enter your Internet account information. Enter 
the username, password and/or service name exactly as 
provided. Click Log on to the Internet !.

None RFC1483

Bridge

N/A

ENET ENCAP

Routing

Dynamic

An IP address only

RFC1483

Routing

Static

A user name and password

PPPoA or PPPoE

Routing

Dynamic

PPPoA

Bridge

N/A

A user name, password and an IP address

PPPoA or PPPoE

Routing

Static

An IP address, subnet mask and a gateway IP 
address 

ENET ENCAP

Routing

Static