ZyXEL Communications P-793H User Manual
Chapter 7 Network Address Translation (NAT) Screens
P-793H User’s Guide
109
"
If you do not assign a Default Server IP address, the ZyXEL Device discards
all packets received for ports that are not specified here or in the remote
management setup.
all packets received for ports that are not specified here or in the remote
management setup.
Click Network > NAT > Port Forwarding to open the following screen.
See
See
for port numbers commonly used for particular services.
Figure 48 NAT > Port Forwarding
The following table describes the fields in this screen.
Table 32 NAT > Port Forwarding
LABEL
DESCRIPTION
Default Server
Setup
Default Server
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen. If
you do not assign a Default Server IP address, the ZyXEL Device discards all
packets received for ports that are not specified here or in the remote
management setup.
Port Forwarding
Service Name
Select a service from the drop-down list box or select User define to go to the
Rule Setup screen and define your own service and its forwarding actions.
Server IP
Address
Enter the IP address of the server for the specified service.
Add
Click this button to add a rule to the table below.
#
This is the rule index number (read-only).
Active
Click this check box to enable the rule.
Service Name
This is a service’s name.
Start Port
This is the first port number that identifies a service.
End Port
This is the last port number that identifies a service.
Server IP
Address
This is the server’s IP address.