ZyXEL Communications P-793H User Manual

Page of 444
Chapter 18 Logs
P-793H User’s Guide
226
Figure 125   Logs > View Log
The following table describes the fields in this screen. 
18.3  Configuring Log Settings 
See 
 for background information. Use the Log Settings screen to 
configure where the ZyXEL Device is to send logs; the schedule for when the ZyXEL Device 
is to send the logs and which logs and/or immediate alerts the ZyXEL Device is to record. See 
 for more information. 
To change your ZyXEL Device’s log settings, click Maintenance > Logs > Log Settings. The 
screen appears as shown.
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full. 
Selecting many alert and/or log categories (especially Access Control) may result in many e-
mails being sent.
Table 83   Logs > View Log
LABEL
DESCRIPTION
Display
The categories that you select in the Log Settings screen display in the drop-down 
list box.
Select a category of logs to view; select All Logs to view logs from all of the log 
categories that you selected in the Log Settings page. 
Email Log Now
Click Email Log Now to send the log screen to the e-mail address specified in the 
Log Settings page (make sure that you have first filled in the E-mail Log Settings 
fields in Log Settings).
Refresh
Click Refresh to renew the log screen. 
Clear Log
Click Clear Log to delete all the logs. 
#
This field displays an index number.
Time
This field displays the time the log was recorded. 
Message
This field states the reason for the log.
Source
This field lists the source IP address and the port number of the incoming packet.
Destination
This field lists the destination IP address and the port number of the incoming 
packet.
Notes
This field displays additional information about the log entry.