ZyXEL Communications P-793H User Manual
Chapter 34 Firmware and Configuration File Maintenance
P-793H User’s Guide
332
Figure 224 Menu 24.7.2: System Maintenance - Upload System Configuration File
To upload the firmware and the configuration file, follow these examples
34.5.3 FTP File Upload Command from the DOS Prompt Example
1 Launch the FTP client on your computer.
2 Enter “open”, followed by a space and the IP address of your ZyXEL Device.
3 Press [ENTER] when prompted for a username.
4 Enter your password as requested (the default is “1234”).
5 Enter “bin” to set transfer mode to binary.
6 Use “put” to transfer files from the computer to the ZyXEL Device, for example, “put
2 Enter “open”, followed by a space and the IP address of your ZyXEL Device.
3 Press [ENTER] when prompted for a username.
4 Enter your password as requested (the default is “1234”).
5 Enter “bin” to set transfer mode to binary.
6 Use “put” to transfer files from the computer to the ZyXEL Device, for example, “put
firmware.bin ras” transfers the firmware on your computer (firmware.bin) to the ZyXEL
Device and renames it “ras”. Similarly, “put config.rom rom-0” transfers the
configuration file on your computer (config.rom) to the ZyXEL Device and renames it
“rom-0”. Likewise “get rom-0 config.rom” transfers the configuration file on the ZyXEL
Device to your computer and renames it “config.rom.” See earlier in this chapter for
more information on filename conventions.
Device and renames it “ras”. Similarly, “put config.rom rom-0” transfers the
configuration file on your computer (config.rom) to the ZyXEL Device and renames it
“rom-0”. Likewise “get rom-0 config.rom” transfers the configuration file on the ZyXEL
Device to your computer and renames it “config.rom.” See earlier in this chapter for
more information on filename conventions.
7 Enter “quit” to exit the ftp prompt.
Menu 24.7.2 - System Maintenance - Upload System Configuration File
To upload the system configuration file, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put configurationfilename rom-0" where "configurationfilename"
is the name of your system configuration file on your workstation,
which will be transferred to the "rom-0" file on the system.
4. The system reboots automatically after the upload system
configuration file process is complete.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put configurationfilename rom-0" where "configurationfilename"
is the name of your system configuration file on your workstation,
which will be transferred to the "rom-0" file on the system.
4. The system reboots automatically after the upload system
configuration file process is complete.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.