Draytek 200 User Manual
VigorFly 200 Series User’s Guide
18
address automatically. And the result will be displayed in the
field of MAC Address.
field of MAC Address.
Besides, if you want to change the MAC address for WAN
interface, simply click Enable and type the MAC address in
this field manually.
interface, simply click Enable and type the MAC address in
this field manually.
After finishing the settings here, please click Next.
3
3
G
G
U
U
S
S
B
B
M
M
o
o
d
d
e
e
m
m
If you want to access Internet by 3G USB modem, choose this mode as the protocol and type
the required information in this web page.
the required information in this web page.
SIM PIN code
Type PIN code of the SIM card that will be used to access
Internet.
Internet.
Modem Initial String1/2
Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to
your ISP.
default value. If you have any question, please contact to
your ISP.
APN Name
APN means Access Point Name which is provided and
required by some ISPs.
required by some ISPs.
Modem Dial String
Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to
your ISP.
default value. If you have any question, please contact to
your ISP.
PPP Username
Type the PPP username (optional).
PPP Password
Type the PPP password (optional).
MAC Address Clone
It is available when the box of Enabled is checked. Click
MAC Address Clone. The router will detect the MAC
address automatically. And the result will be displayed in the
MAC Address Clone. The router will detect the MAC
address automatically. And the result will be displayed in the