ZyXEL Communications NBG420N User Manual

 Chapter 7 Wireless LAN

NBG420N User’s Guide

Use this screen when you want to add a wireless station using WPS. To open this screen, click 
Network > Wireless LAN > WPS Station tab.

"

Note: After you click Push Button on this screen, you have to press a similar 
button in the wireless station utility within 2 minutes. To add the second 
wireless station, you have to press these buttons on both device and the 
wireless station again after the first 2 minutes.

Figure 71   WPS Station

The following table describes the labels in this screen.

Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN 
scheduling is disabled by default. The wireless LAN can be scheduled to turn on or off on 
certain days and at certain times. To open this screen, click Network > Wireless LAN > 
Scheduling tab.

Table 38   WPS Station

Push Button

Use this button when you use the PBC (Push Button Configuration) method to 

configure wireless stations’s wireless settings. See 

.

Click this to start WPS-aware wireless station scanning and the wireless security 

information synchronization. 

Or input station’s 

PIN number

Use this button when you use the PIN Configuration method to configure wireless 

station’s wireless settings. See 

Type the same PIN number generated in the wireless station’s utility. Then click 

Start to associate to each other and perform the wireless security information 

synchronization.