ZyXEL Communications NBG420N User Manual

 Chapter 7 Wireless LAN

NBG420N User’s Guide

"

If you have not configured your wireless settings yet you can do so by using 
the Wizard in the web configurator you access from your computer. Click the 
Wizard icon

 or the Go To Wizard Setup web link you see after logging 

into the web configurator from your computer. See 

 for 

more information on using the Wizard.

1 On the iPod Touch’s main screen press Settings and then press Wi-fi.
2 On the list of networks press the NBG420N’s network name (SSID) to connect to it. If 

you are prompted for any security settings enter them and press connect.

V

The pre-shared key is case-sensitive. If you have problems connecting then 
try checking the security settings in the web configurator from your computer 
and try again.

Now that you are connected to the NBG420N’s wireless network you can access the iPod 
Touch web configurator. To do this follow the steps below:

1 Launch the iPod Touch’s web browser from the main screen. The default web browser is 

Safari.

2 Enter the IP address of the NBG420N into the address bar and go to that address. The 

default IP address for the NBG420N is 192.168.1.1.

3 The login screen should display.

Figure 77   Login Screen