ZyXEL Communications NBG420N User Manual

NBG420N User’s Guide

This chapter discusses how to configure settings while your NBG420N is set to AP Mode. 
Many screens that are available in Router Mode are not available in AP Mode.

"

See 

 for an example of setting up a wireless network in 

AP mode. 

Use your NBG420N as an AP if you already have a router or gateway on your network. In this 
mode your device bridges a wired network (LAN) and wireless LAN (WLAN) in the same 
subnet. See the figure below for an example.

Figure 30   Wireless Internet Access in AP Mode 

1 Log into the web configurator if you haven’t already. See the Quick start Guide for 

instructions on how to do this.

2 To set your NBG420N to AP Mode, go to Maintenance > Sys OP Mode > General and 

select Access Point.