ZyXEL Communications NBG420N User Manual

 Chapter 5 AP Mode

NBG420N User’s Guide

The configuration of wireless and maintenance settings in AP Mode is the same as for Router 
Mode.

• See 

 for information on the configuring your wireless network.

• See 

 for information on the configuring your 

Maintenance settings. 

1 Connect your computer to the LAN port of the NBG420N. 
2 The default IP address if the NBG420N is “192.168.1.1”. In this case, your computer 

must have an IP address in the range between “192.168.1.2” and “192.168.1.255”.

3 Click Start > Run on your computer in Windows. 
4 Type “cmd” in the dialog box.
5 Type “ipconfig” to show your computer’s IP address. If your computer’s IP address is 

not in the correct range then see 

 for information on changing 

your computer’s IP address.

6 After you’ve set your computer’s IP address, open a web browser such as Internet 

Explorer and type “192.168.1.1” as the web address in your web browser.

See 

 for a tutorial on setting up a network with an AP.

Apply

Click Apply to save your changes to the NBG420N.

Reset

Click Reset to reload the previous configuration for this screen.