ZyXEL Communications NBG-418N v2 User Manual
Chapter 15 Bandwidth MGMT
NBG-418N v2 User’s Guide
127
The following table describes the labels in this screen.
15.5 Advanced Screen
Use this screen to setup the QoS rules for the NBG-418N v2. Click Management > Bandwidth
MGMT > Advanced. The following screen displays.
MGMT > Advanced. The following screen displays.
Figure 93
Management > Bandwidth MGMT > Advanced
The following table describes the labels in this screen.
Table 51
Management > Bandwidth MGMT > Bandwidth MGMT
LABEL
DESCRIPTION
Service Management
Enable Bandwidth
Management
Management
Click the Enable Bandwidth Management check box to activate the bandwidth
management feature in the NBG-418N v2.
management feature in the NBG-418N v2.
Apply
Click Apply to save your changes in t his screen.
Reset
Click Reset to begin configuring this screen afresh.
Table 52
Management > Bandwidth MGMT > Advanced
LABEL
DESCRIPTION
QoS Setup
Total Bandwidth (0,
Unlimited)
Unlimited)
This field shows the maximum number of data in kbps the NBG-418N v2 is allowed to
send out and allowed to come in through a source interface.
send out and allowed to come in through a source interface.
Up Stream
Type the Up Stream or maximum outgoing transmission data rate (kbps) that is
allowed to go through the source interface on the NBG-418N v2.
allowed to go through the source interface on the NBG-418N v2.
Down Stream
Type the Down Stream or maximum incoming transmission data rate (kbps) that is
allowed to go through the source interface on the NBG-418N v2.
allowed to go through the source interface on the NBG-418N v2.
Apply
Click Apply to save your changes back to the NBG-418N v2.
Reset
Click Reset to begin configuring this screen afresh.
QoS Rules
#
This field shows the index number of the QoS rule.
Source IP Address
This field shows the source IP Address of the data traffic.
Max Bandwidth(kpbs)
Up Ceiling
This field shows the maximum outgoing transmission data rate (kbps) that is allo wed to
go through the source interface on the NBG-418N v2.
go through the source interface on the NBG-418N v2.
Down Ceiling
This field shows the maximum outgoing transmission data rate (kbps) that is allowed to
go through the source interface on the NBG-418N v2.
go through the source interface on the NBG-418N v2.
Delete
Click the Delete check box to select the QoS rule you want to delete.