ZyXEL Communications NBG-418N v2 User Manual
Chapter 2 The Web Configurator
NBG-418N v2 User’s Guide
19
Figure 5
Selecting the setup mode
2.3 Resetting the NBG-418N v2
If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the WPS/RESET button at the back of the NBG-418N v2 to reload the factory-default
configuration file. This means that you will lose all configurations that you had previously saved, the
username will be reset to admin and password will be reset to 1234. The IP address will be reset
to “192.168.1.1”.
to use the WPS/RESET button at the back of the NBG-418N v2 to reload the factory-default
configuration file. This means that you will lose all configurations that you had previously saved, the
username will be reset to admin and password will be reset to 1234. The IP address will be reset
to “192.168.1.1”.
Make sure the power LED is on and press the WPS/RESET button for longer than 10 seconds to
restart/reboot and set the NBG-418N v2 back to its factory-default configurations.
restart/reboot and set the NBG-418N v2 back to its factory-default configurations.