ZyXEL Communications NBG-418N v2 User Manual
Chapter 6 Wireless LAN
NBG-418N v2 User’s Guide
74
6.11 AP Select Screen
Use this screen to choose an access point that you want the NBG-418N v2 in universal repeater
mode) to connect to. You should know the security settings of the target AP.
mode) to connect to. You should know the security settings of the target AP.
To open this screen, click Network > Wireless LAN > AP Select tab.
Figure 52
Network > Wireless LAN > AP Select
The following table describes the labels in this screen.
Apply
Click Apply to save your changes back to the NBG-418N v2.
Reset
Click Reset to reload the previous configuration for this screen.
Table 26
Network > Wireless LAN > MBSSID
LABEL
DESCRIPTION
Table 27
Network > Wireless LAN > AP Select
LABEL
DESCRIPTION
AP Select
First
Click First button to go to the first page of the AP select table.
Previous
Click Previous button to go to the Previous page in the AP select table.
Next
Click Next button to go to the next page in the AP select table.
Last
Click Last button to go to the last page of the AP select table.
Select
Use the radio button to select the wireless device to which you want to connect.
SSID
This displays the Service Set IDentity of the wireless device. The SSID is a unique name
that identifies a wireless network. All devices in a wireless network must use the same
SSID.
that identifies a wireless network. All devices in a wireless network must use the same
SSID.
MAC
This displays the MAC address of the wireless device.
Channel
This displays the channel number used by this wireless device.