ZyXEL Communications NBG334SH User Manual
Chapter 19 Tools
ZyXEL NBG-334SH User’s Guide
188
After you see the Firmware Upload In Process screen, wait two minutes before logging into
the ZyXEL Device again.
the ZyXEL Device again.
Figure 108 Upload Warning
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 109 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
Figure 110 Upload Error Message
19.2 Configuration Screen
See the Firmware and Configuration File Maintenance chapter for transferring configuration
files using FTP/TFTP commands.
Click Maintenance > Tools > Configuration. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
files using FTP/TFTP commands.
Click Maintenance > Tools > Configuration. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.