ZyXEL Communications P660HN-Fx User Manual

 Chapter 6 Wireless

ADSL Series User’s Guide

Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.

WPS allows you to quickly set up a wireless network with strong security, without having to 
configure security settings manually. Set up each WPS connection between two devices. Both 
devices must support WPS. See 

 for more information about WPS.

Note: The ZyXEL Device applies the security settings of the SSID1 profile (see 

). If you want to use the WPS feature, make sure you have set the 

security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security.

Click Network Setting > Wireless > WPS. The following screen displays. Select Enable and click 
Apply to activate the WPS function. Then you can configure the WPS settings in this screen. 

Wireless Network Name 
(SSID)

The SSID (Service Set IDentity) identifies the service set with which a wireless 
device is associated. Wireless devices associating to the access point (AP) must 
have the same SSID. 

Enter a descriptive name (up to 32 English keyboard characters) for the wireless 
LAN. 

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station 
cannot obtain the SSID through scanning using a site survey tool.

BSSID

This shows the MAC address of the wireless interface on the ZyXEL Device when 
wireless LAN is enabled.

Security Level

Security Mode

Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on 
this wireless network. The wireless clients which want to associate to this network 
must have same wireless security settings as the ZyXEL Device. After you select to 
use a security, additional options appears in this screen.

Or you can select No Security to allow any client to associate this network without 
any data encryption or authentication.

See 

 for more details about this field.

Apply

Click Apply to save your changes.

Back

Click Back to exit this screen without saving.

Wireless > More AP: Edit