ZyXEL Communications P660HN-Fx User Manual
Chapter 25 Diagnostic
ADSL Series User’s Guide
244
25.3 The DSL Line Screen
Click Maintenance > Diagnostic > DSL Line to open the screen shown next.
Figure 133
Maintenance > Diagnostic > DSL Line
The following table describes the fields in this screen.
Table 85
Maintenance > Diagnostic > DSL Line
ITEM
DESCRIPTION
ATM Status
Click this button to view your DSL connection’s Asynchronous Transfer Mode (ATM) statistics.
ATM is a networking technology that provides high-speed data transfer. ATM uses fixed-size
packets of information called cells. With ATM, a high QoS (Quality of Service) can be
guaranteed.
ATM is a networking technology that provides high-speed data transfer. ATM uses fixed-size
packets of information called cells. With ATM, a high QoS (Quality of Service) can be
guaranteed.
The (Segmentation and Reassembly) SAR driver translates packets into ATM cells. It also
receives ATM cells and reassembles them into packets.
receives ATM cells and reassembles them into packets.
These counters are set back to zero whenever the device starts up.
inPkts is the number of good ATM cells that have been received.
inDiscards is the number of received ATM cells that were rejected.
outPkts is the number of ATM cells that have been sent.
outDiscards is the number of ATM cells sent that were rejected.
ATM
Loopback
Test
Loopback
Test
Click this button to start the ATM loopback test. Make sure you have configured at least one
PVC with proper VPIs/VCIs before you begin this test. The ZyXEL Device sends an OAM F5
packet to the DSLAM/ATM switch and then returns it (loops it back) to the ZyXEL Device. The
ATM loopback test is useful for troubleshooting problems with the DSLAM and ATM network.
PVC with proper VPIs/VCIs before you begin this test. The ZyXEL Device sends an OAM F5
packet to the DSLAM/ATM switch and then returns it (loops it back) to the ZyXEL Device. The
ATM loopback test is useful for troubleshooting problems with the DSLAM and ATM network.